Skip to main content

Expression of Interest (EOI) for the Supply of Postharvest and Small Agriculture Equipment to Sustainable Mechanization Project at Giz Rwanda

GIZ Rwanda

The Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH has been working in Rwanda for more than 40 years.

Rwanda is a country with a turbulent and, at times, tragic history, and the impact of the 1994 genocide is still felt today. Nevertheless, Rwanda has achieved progress at a number of levels since 2000. Stability, security, steady economic growth and low corruption are some of the key successes. The country is also regarded as a pioneer in Africa in environmental protection, digitalisation and gender equality.

Despite these encouraging developments, however, Rwanda is still a very poor country that continues to rely on international support. This support is in virtually all sectors and is coordinated by the Rwandan Government. As a reliable partner in an efficient task-sharing system, GIZ works in three priority areas on behalf of the German Government:

  • Economic development and employment
  • Governance and democracy
  • Digitalisation
Rate this employer
Average: 4 (236 votes)

Expression of Interest (EOI)

Supply of Postharvest and small agriculture equipment to Sustainable Mechanization Project at GIZ Rwanda.

Reference Number:91184403

Publication date: 31.10.2024

Introduction 

The Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH is a federally owned international cooperation enterprise for sustainable development with worldwide operations. The GIZ Office in Kigali covers GIZ’s portfolio in Rwanda and Burundi. GIZ Rwanda/Burundi implements projects on behalf of the German Federal Ministry for Economic Cooperation and Development, the European Union and other commissioning authorities in the following priority areas: Sustainable Economic Development; Good Governance; Climate, Energy and Sustainable Urban Development; Digitalization and Digital Economy; and regional projects in the Great Lakes Region.

Background

The Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH was commissioned by the German Federal Ministry for Economic Cooperation and Development (BMZ) to implement the project 'Sustainable Mechanization of Value Chains through Innovative, Gender-Sensitive Business Models', jointly with Germany Machinery Rings Foundation and Volkswagen.

 Sustainable mechanization of value chains through innovative, gender-sensitive business models" is an individual fund measure (EZM) of the "Fund for the promotion of innovations in the agricultural and food sector" (i4Ag), a global fund financed by the Special Initiative "Transformation of Agricultural and Food Systems" (SI AGER). The aim of this EZM fund is to facilitate access to mechanization services in agriculture, thereby improving the livelihoods of Rwandan smallholder farmers and SMEs, as well as their resilience towards climate change.

The main activities of the project are to establish Machinery Rings in Gashora, Bugesera as a self-help organization for and by smallholder farmers, to introduce the electric tractors developed by Volkswagen, to Construct an e-Hub with photovoltaic to charge the e-tractors with renewable energy, establish SMEs in the e-Hub, in the post-harvest and processing sector, and the development of skills in sustainable and climate resilient farming.

Context

The Sustainable Mechanisation (i4Ag) project, together with its partners, organises ongoing capacity building for its MR members and beneficiaries as smallholder farmers to improve agricultural practices, adopt sustainable farming methods and increase crop yields. This leads to greater income stability and improved livelihoods.

Capacity building of MR farmers in post-harvest and sustainable agriculture will be a continuous process using various modern equipment and tools to give them access to skills, facilitation and empowerment in the use of technical tools. Training will be provided through demonstration, with emphasis on reducing productivity losses through the use of innovative techniques that prevent spoilage, improve quality and extend shelf-life of agricultural produce. In addition, the acquisition of skills in post-harvest techniques will help maintain the nutritional quality of harvested produce.

In the same vein, Sustainable Mechanisation (i4Ag), implemented by GIZ together with partners, would like to invite interested and eligible national and international companies to tender for the supply of high quality small post-harvest tools and equipment to facilitate MRs to carry out practical training and capacity building in modern agriculture and value chain management.

Specifications

S/N

Item

 Specifications

Sample Picture

Qty

1.

Combined posho mill hybrid

10 HP 3-phase electric motor, output 3-4 bags per hour, different sieves for different levels of flour, additional accessories to remove the bran from the maize.   

 

kjuytgrfdsdcfvg

5

 2.

Maize degermer

15 HP 3 phase electric motor output 3 bags per hour.

 

awsertyhjk

5

3.

 

Mist blower

The engine is a single-cylinder, 2-cycle with a power output of 2.6 kW / 3.5 HP and a displacement of 70 cc. It features a 47 mm x 40 mm bore and stroke, a float-type carburetor, and an electronic magneto ignition system. The fuel tank has a capacity of 1.4 liters, while the solution tank holds          12 liters. It includes a 4-position liquid dosage control with liquid on-off control and a throttle lever. The maximum air velocity is 100 m/s. The net weight is 11.5 kg, the gross weight is 13 kg, and the packing size is 690 mm x 450 mm x 330 mm.

 

 

uytgrfedsxcvb

5

4.

Hand-push Roller Corn Planter and Fertilizer 2 Rows Hand Push Corn Seeder

Double mouth and 3-12 mouths: can be adjusted 3-4-5-6-7-8-9-10-11-12 mouths. Plant spacing are: 58-43-35-30-25-21-17-14cm. Seed fertilizer fixed about 3cm. Weight: 13kgs.  Seeding rate: 1-3 seed. Dimension: 57*24*56 cm.  suitable seeds: corn, soybean, peanut etc.                   

wertghj

10

5.

 

Subsoiler

 

 

Engages up to 11'' of depth with additional tractor weight.
1.25'' tip width
16'' shank length.

 

uytresazxcvb

2

6

Rototiller

Width sizes: 18'', 20'', 26'', 30'' Adjustable Adjustable widths: 26'' narrows to 20''; 30'' narrows to 26''Tines rotate 50% faster than competitive brands at a rate of 20 rotations per wheel revolution.

FDDFGHJ

2

7

Walking tractor

Engine: Honda GX390
Electric Start Option: Yes
Transmission: All Gear Drive
Clutch Type: Patented PowerSafe Clutch with a 5-year warranty
Axle Configuration: Differential Drive with Lockout
Working Gears: 3 forward, 3 reverse
Working Gear Speeds: 0.9, 2.0, and 3.0 MPH
Transport Gear Speed: N/A
Standard Wheel/Tire Size: 5x12x22"

Weight: 342 pounds (with 30" tiller)
Individual Wheel (Steering) Brakes: Yes
Parking Brake: Yes

 

JHGFDSZXCV

2

8

Rice thresher

Capacity: 400-500 kg per hour
Power Options: 3 kW electric motor
8 HP diesel engine
170F gasoline engine
Weight: 85 kg
Dimensions: 1260 x 1320 x 1120 mm (L x W x H)
Suitable for: Medium-scale operations with flexible power options and portability


 

 

UYTREWSXCV

1

9

Maize sheller (portable)

7,5 HP petrol engine output 35 bags per hour

 

SDFGHJM

2

NB: (The Pictures here above are like as examples of modules, please consider more specifications rather than pictures.)

Delivery Conditions and other details

  • Place of delivery: To be delivered in Bugesera District- Gashora at Machinery Ring Offices.
  • Reception of implements: By technical team after verification of specifications.

Note: Any implements not complying with required specifications or physical defect/ mechanical fault will not be considered and must be returned without any condition or additional costs.

Technical details and eligibility criteria

  • Clear technical details including the brand and model of implements you want to supply
  • Delivery time must be indicated.
  • Provides guarantee and after-sales support for the products at least 12 months
  • Proof of Handling similar assignments of at least EUR 10.000 per assignment by submitting invoices and accompanying delivery notes of previous works
  • Proof of similar equipment delivered in Rwanda in the last three years.
  • Tenderer must ensure the presence of a technician during delivery, offloading, and installation (where necessary) of the said equipment or machinery.
  • At delivery, the tenderer technician will be required to provide training at delivery addresses and setting up for usage as well as provide a comprehensive operation manual failure to which the item in question will not be accepted.

Required Document With/including the documents and clear information on the following details:

  • RDB registration certificate
  • VAT registration certificate
  • Tax clearance certificate
  • Company Profile
  • Referees or reference certificates of similar tenders executed

Below are the terms and conditions:

Your offer has to be submitted on email to RW_Quotation@giz.de until 15/11/2024

The financial offer has to be submitted in PDF format and the price must be in Rwandan Francs and VAT excluded (if applicableas attachment to the email with the subject: Financial offer 91184403

If the emails exceed the default email size of 30MB, offers can be exceptionally submitted through https://filetransfer.giz.de/

Offers submitted through any other sharing platform, as google documents or similar will not be considered.

Offers submitted in hard copy will not be considered.

GIZ reserves all rights.

Click on the APPLY button to send your application documents:
  • Your application will be sent to the employer immediately (Allowed formats: .doc .pdf .txt .docx)
  • A confirmation email will be sent to you few minutes afterwards
  • You can request any documents archived from our website (ex: a job description, a CV, a cover letter...)